trick

The reason for not draining the washing machine water

When it comes to home appliances, almost the first thing that comes to mind is the refrigerator, washing machine and dishwasher. Each of these devices, not necessarily because they are electric, but because they are practical, may be damaged or have some sort of problem. In these circumstances, because they are expensive, they cause fear and stress in our lives. For example, when you do not know the reason why your washing machine does not drain, and at the same time, the fact that the clothes are not washed and water stays in them, it has created an annoying situation. We decide in this article to The reason for not draining the washing machine water Let’s pay. We are proud to be with you.

Cause of water accumulation in the laundry

The problem of small appliances such as juicers, food processors and steamers is not a big problem, as many of them may not cost much to repair or replace, but avoid the day when basic appliances such as washing machines get in trouble. As mentioned, one of the most common problems that can occur with this appliance is that the washing machine does not drain.

There are many reasons why a washing machine water does not drain, but the most common are clogging of the drain pump filter with waste or hair, improper operation of the drain pump, broken door switch and clogged drain hose. The purpose of mentioning the reason why the washing machine water does not drain is to be able to troubleshoot and fix the problem.

Clogged drain hose

One of the several cycles of the washing machine is the water coming out of the drum of this device. The usual procedure in this direction is that the machine uses a water pump and drains the water from the drum through a suction hose. If your washing machine is washing clothes while you hear the drain pump start to drain but nothing happens, there may be a problem with the drain hose. In this way, the reason for not draining the washing machine water is clogged or blocked, and therefore the washing machine does not work as it should.

To check for a clogged drain hose, turn off the machine and open the hose. Once you have completely removed the hose from the washing machine, check to see if anything is stuck inside the hose. Try to see if water passes through it and comes out from the other side? It may even be necessary to use a long tool to clean the inside of the hose and remove the blockage. Once you have removed the blockage and made sure that water is flowing through it, you can reconnect the hose. Now it is better to try draining the water again.

Blocking the drain pump filter

If, after checking the drain hose, the problem still persists and something appears to be clogged, the washing machine pump filter may not be the cause of the drain water leaking. In fact, a clogged filter is another common washing machine problem that does not drain water.

All washing machines have a drain pump that is used to drain water from the tub. This step is designed and performed after the washing and rinsing cycles of the clothes in the washing machine cycle. While you feel that the pump is running during the wash but the water is passing slowly or blocking the water altogether, it is possible that the pump filter is clogged.

In this case, you should look at it by turning the pump impeller. If it does not turn, it means that something is preventing it from doing so and the problem must be fixed. Therefore, to solve this problem, the first thing you need to do is access the drain pump filter on the back of the device and clean it of any contaminants or debris that may have blocked it.

Fractures or any problems with the door switch

If you check the above problems and make sure that the problem is not from those parts, the reason why the washing machine does not drain water may be due to a breakage or any problem in the door switch. It should be noted that the door switch is an important part of the safety system of this application, which is installed in all washing machines.

The door switch is a loud clicking sound that you hear in your washing machine a few seconds after you start the washing process. In fact, this sound informs the whole system that the door of the washing machine is locked and is safe for the rest of the operation. This is why your machine shuts off when you open the door of your washing machine, even if the water is not drained.

Sometimes you may be dealing with a defective door switch. So if there is a problem with the door switch, it can fool the whole system and make the washing machine think the door is open. So if you suspect a door switch, you should test it. After testing, if the switch is broken, you can buy a new switch and replace it with a defective one.

The belt has a problem and the reason for not washing the water of the washing machine

The belt has a problem

If you do not hear the sound of pumping while washing in the washing machine, something is wrong with the pump. The actuator belt is most likely worn or broken. The belt is what drives the pump and is located at the bottom of the washing machine. If you suspect a belt problem, you should contact your dealer to have it repaired or replaced and the belt replaced.

Defective drain pump

If during operation of the washing machine you notice that water does not come out of the tub and the belt is in good condition, most likely the reason for not draining the washing machine water is the faulty or damaged drain pump and naturally it should be replaced.

Turn off the device and inspect the relevant parts. If you check and find that there is no obstruction and no sound is produced, the possibility of the pump itself being damaged is very high. If the drain pump needs to be replaced, it will be determined and you will have to replace it with a new pump.

Cause of water accumulation in the washing machine off

Obviously, water only enters the washing machine when you press the start button on the washing machine or command it to wash. But sometimes your machine is off but you have water in the washing machine tub. The occurrence of this event can have a cause or causes, which we will discuss in the following.

Cause the washing machine water does not drain

  • Problem with solenoid valve (water inlet valve):

If the water collected in the tub or boiler of the washing machine is clean, there may be a problem with the solenoid valve or the water inlet valve of this machine. Obviously, all parts of the appliance will wear out over time, and so is the solenoid or solenoid valve.

If the solenoid valve of your device has a problem, it will not be able to pass all the water of the car and can only pass some of it. As a result, water collects in the off boiler. In such cases, you should replace the solenoid valve of your machine to eliminate the reason for not draining the washing machine.

Problems with the solenoid or water inlet valve and the reason why the washing machine water does not drain

  • Problem with hydrosensor:

Since the water level in the boiler or tub of the washing machine is determined by a device called a hydrosensor, if this part has any problems or breakdowns, it can definitely be the reason why the water in the washing machine does not drain. The problem with this sensor is that it does not send accurate information about the water level inside the boiler of the washing machine, and water accumulates in the washing machine off.

  • Problem with electronic board:

In the washing machine, there is a part called the electronic board, which sends an electric current to other parts of this machine, manages them, and determines special programs for washing different clothes. You may be wondering what this piece has to do with the accumulation of water in the off washing machine? In response, we must know that one of the functions of the electronic board is to send the command to turn off and on the water. When the washing machine needs water to wash the clothes, this part sends the said command and controls the washing operation. Therefore, if the electronic board has any problems or malfunctions, we will definitely see water accumulating in the off washing machine.

Washing machine door rubber

Concluding remarks

The reason for not draining the washing machine water It can be related to different parts. On the other hand, some people think that the accumulation of water in the rubber of the washing machine door is the result of a disorder or problem. But we must note that contrary to this notion, this is not a problem and it is quite natural. By drying the water accumulated in the washing machine tires, you not only prevent bad odors in your machine, but also, in addition to increasing the life of the machine tires, you prevent the growth and multiplication of bacteria and fungi in your washing machine.

Show More

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close